What is a backplate and wing?
A jacket BCD is a vest: the bladder wraps around your sides and often your chest, and most of the weight sits on a belt or in pockets around your hips. A backplate and wing is three simple parts: a backplate (stainless steel or aluminium) that the cylinder bolts to, a wing (a bladder behind you, between the plate and the cylinder), and a harness of webbing that holds the plate on your body. The difference is where the air and the weight sit: on your back, in line with the cylinder, instead of around your torso.
Trim, and less clutter
Good trim means lying flat in the water, like a relaxed skydiver. That position makes finning easier, keeps your fins off the reef, and uses less air. A wing puts the buoyancy behind you, so it lifts your torso evenly; a jacket often puts air at your sides or toward your chest, which can make your feet drop. A backplate and wing makes the flat position the natural one, and it leaves your chest and sides clear, which is simply easier along the rocky walls and gullies off Jeffreys Bay. The parts are separate, so you can replace a worn harness or change the wing without buying a whole new BCD.
Fit, wetsuit thickness and where the weight sits
In Jeffreys Bay, a 5 mm wetsuit is a good all-round choice, and many divers use 7 mm or add a vest in the cooler months. See how to stay warm while SCUBA diving. A jacket that fits over a thin suit can feel tight over a 7 mm. A backplate harness is webbing, so you can loosen or tighten it in seconds when you switch suits, and adjust it for different body shapes. It also means one size fits almost everyone. Jacket BCDs come in XS to XXL, so a growing teen, a partner or a buddy borrowing your kit needs a different size. With a backplate and wing you just adjust the webbing, and in most cases the only real change is how tight the crotch strap is set. The Tecline Start Mono set we sell uses a quick-release harness. A typical 3 mm stainless-steel plate weighs around 2 kg and sits on your back, so you can take the same amount off your weight belt. An aluminium plate is lighter and useful for travel, but with 5 to 7 mm of neoprene most people here need the extra weight of stainless.
It grows with you
Start with a single cylinder, which is how we dive on our local reefs. Later, if you move into twins, sidemount or technical training, you keep the same plate and harness and change the wing and the tank attachments. A jacket is usually a single-tank vest for life; a backplate and wing is a system you can grow. If you're still deciding when to buy, see buying or renting SCUBA gear and what SCUBA equipment costs.
The honest downsides, and who a jacket still suits
It isn't perfect. At the surface, some wings (especially when they're full of air) can tip you slightly face-down. You learn to use a little less air in the wing, or to kick gently and keep your head up. A jacket often floats you more upright and face-up, which some divers prefer. The harness also needs a proper first setup (crotch strap, waist belt and shoulder length all matter). Once it's right, you only tweak it when your suit changes. A jacket may still be better if you only dive once or twice a year, spend a lot of time at the surface, or would rather not set up a harness. The right kit is the one you'll be comfortable in.
The Tecline Start Mono set we stock
The set we recommend as a starting point is the Tecline Start Mono Tank Set (SKU T12007). It includes a Donut 13 wing, a 3 mm stainless-steel backplate, an adjustable quick-release harness and a carrying bag. Wing colour is your choice. Paul pool-tested this set in September 2026 and has since dived it in the ocean off Jeffreys Bay many times, including with his Sea & Sea housing and Nikon camera rig. His verdict: "I feel so much freedom with this setup." A flat, stable position makes a real difference when you're holding a camera steady over the reef. We've sold several from the shop since. Normal retail is R10,775. If you'd like to try one or talk through sizing, contact us for special pricing and advice, or browse other BCDs and wings.
Come and talk it through
We're happy to walk you through the setup, help you fit the harness, and be honest about whether a backplate and wing or a jacket is the better fit for how you dive.
WhatsApp or call Paul on 083 521 5093, or browse the J-Bay SCUBA shop.